Description
These chlorine granules are one of the most popular products for ensuring pool and spa water is safe and bacteria free.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water.? They are suitable for shock dosing small above ground pools.? You can find dosing amounts below.
Key Features
Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
Application Instructions
1. Maintain pH level within the ideal range of 7.2 ? 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results.
2. Maintain free chlorine residuals for spas within the range 3 ? 5mg/l (ppm).? For swimming pools it should be 1 – 3mg/l (ppm). Freshly filled spas require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools or spas where temperatures exceed 20? degrees C. If below this temperature or in doubt it is recommended to pre-dissolve in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa or pool whilst the pumps are turned ?on?.
4. Repeat dose application if necessary to achieve the required levels.
5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination.
Dose Rates
Medium hot tub 1,000 litre (220 Gallons) of water requires 2g to increase the chlorine level by 1mg/l (ppm) or 6g to increase chlorine level by 3mg/l(ppm)
Large hot tub 1,500 litre (330 Gallons) of water requires 3g to increase the chlorine level by 1mg/l (ppm) or 9g to increase chlorine level by 3mg/l(ppm)
Small pool 40,000 litres of water requires 80g to increase the chlorine level by 1mg/l (ppm) or 240g to increase chlorine level by 3mg/l(ppm)
Medium pool 60,000 litres of water requires 120g to increase the chlorine level by 1mg/l (ppm) or 360g to increase chlorine level by 3mg/l(ppm)
Large pool 80,000 litres of water requires 160g to increase the chlorine level by 1mg/l (ppm) or 480g to increase chlorine level by 3mg/l(ppm)
Bertie Pimplebum (verified owner) –
Great for padding pool
Nasreen Begum (verified owner) –
After ordering granules I was sent tablets. Contacted the company and was answered by an automated email, which was both annoying and frustrating. It wasn’t until I sent my third email that I got a response that contained information and was told that someone else had changed their order and so were given the last pack of granules and so I was sent tablets. I was told to crush the tablets and that would treat the water the same as the granules. I was also offered a price difference refund of £4 which I thought was reasonable, but when we tried to crush the tablets and use them, it didn’t work as advised and so I had to email again requesting either the granules or a refund and again got the automated system.I then received a message to say that a refund had been arranged through hereIf it wasn’t for the fact that I was on a tight time limit for the product, I probably wouldn’t have found it all so annoying, but I was, so i did!
Mat Johnson (verified owner) –
Is ok
Fredric Markus (verified owner) –
Very cost effective
Clea No –
Good value
Caper 54 (verified owner) –
Child lock top.
Speedbird –
No problems or irritation to the skin so happy with this and good value for money
Jenn2thelynn –
Five Stars
Rebecca Harley (verified owner) –
A Leaflet about how to use
Sebatianus (verified owner) –
A good price for these chlorine granules, still have loads left after a gorgeous summer in the pool this year