Description
These chlorine granules are one of the most popular products for ensuring pool and spa water is safe and bacteria free.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water.? They are suitable for shock dosing small above ground pools.? You can find dosing amounts below.
Key Features
Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
Application Instructions
1. Maintain pH level within the ideal range of 7.2 ? 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results.
2. Maintain free chlorine residuals for spas within the range 3 ? 5mg/l (ppm).? For swimming pools it should be 1 – 3mg/l (ppm). Freshly filled spas require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools or spas where temperatures exceed 20? degrees C. If below this temperature or in doubt it is recommended to pre-dissolve in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa or pool whilst the pumps are turned ?on?.
4. Repeat dose application if necessary to achieve the required levels.
5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination.
Dose Rates
Medium hot tub 1,000 litre (220 Gallons) of water requires 2g to increase the chlorine level by 1mg/l (ppm) or 6g to increase chlorine level by 3mg/l(ppm)
Large hot tub 1,500 litre (330 Gallons) of water requires 3g to increase the chlorine level by 1mg/l (ppm) or 9g to increase chlorine level by 3mg/l(ppm)
Small pool 40,000 litres of water requires 80g to increase the chlorine level by 1mg/l (ppm) or 240g to increase chlorine level by 3mg/l(ppm)
Medium pool 60,000 litres of water requires 120g to increase the chlorine level by 1mg/l (ppm) or 360g to increase chlorine level by 3mg/l(ppm)
Large pool 80,000 litres of water requires 160g to increase the chlorine level by 1mg/l (ppm) or 480g to increase chlorine level by 3mg/l(ppm)
Jeanette Shea (verified owner) –
Brilliant value for money
LD H. –
I think my pool must be a chemical soup by now; I have corrected the pH to below 7.5 then shocked it(numerous times) and after this added algaecide but still it is green. I have shocked it to the extent that the Chlorine reading is well over 3ppm.In the forty years I have had this pool it has done this a few times and my response was always to empty it and start again. What is happening here?
D. Rose (verified owner) –
Brilliant product, kept the pool really clean and didn’t have to scrub the bottom clean after emptying.
Slawek Wach (verified owner) –
great stuff
Ibrahima Sadio (verified owner) –
Order DeepBlue granules stated in stock, order stated DeepBlue, dispatch note stated DeepBlue but ended up getting another product yet I only trust the DeepBlue brand as recommended by the pool manufacturer. Not happy and to see note from seller asking for review saying may change product is not acceptable. Why change when item was in stock! More than disappointed and not recommended.
Jacob James (verified owner) –
Very good and quick delivery !!!
M. Kanters (verified owner) –
Good
Kreg Harsha –
Good amount for money. Easy to use
THE koi lover (verified owner) –
Quite expensive.
Elliot B. (verified owner) –
great for hot tubs good value