Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Denise Temple (verified owner) –
habe ich seit Nutzung meines Pools in Anwendung und bin sehr zufrieden damit
Mr Andrew R Kinsey (verified owner) –
5 stars
Cedric (verified owner) –
Die gesamte Lieferung war o.k., und ohne Probleme.
Mr J. V. (verified owner) –
20 stars
Raquel T. (verified owner) –
40 stars
Juan (verified owner) –
100 stars
Nikogam (verified owner) –
Sehr gutes und preiswertes Produkt, funktioniert sehr gut und ist zu dem gnstiger wie manch andere Marken. Einziger Kritikpunkt, ein Dosierbecher wre toll
DG Fieldsend (verified owner) –
Wirkt wie auf der Packung beschrieben. Ein zuverlssiges Produkt
J. Hughes (verified owner) –
50 stars
N. Rach (verified owner) –
bin mit dem Produkt sehr zufrieden