Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
David F. (verified owner) –
bon produit
Long John (verified owner) –
5 stars
Martin L Smith (verified owner) –
20 stars
David C (verified owner) –
Gern wieder
Marco Maria Secci (verified owner) –
1000 stars
Cutie (verified owner) –
produit indispensable pour faire baisser son PH
Cutie (verified owner) –
produit indispensable pour faire baisser son PH
4faceswest (verified owner) –
Wir bestellen das Produkt seit Jahren und waren immer zufrieden.
Mrs. Pauline Penfold (verified owner) –
Wir benutzen das Produkt seit wir den Pool haben und haben immer nur beste Werte erreicht.
Coty (verified owner) –
Verwende das Produkt seit ca 15 Jahren.Bin immer damit zufrieden.