Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
silly (verified owner) –
Shock for hot tubs
John W Pennell (verified owner) –
Dont use too much
K.R. (verified owner) –
Todo ok
El&fed (verified owner) –
Came in two handy tubs
Ian Gooding (verified owner) –
Macht was er soll
César Marrero Trujillo (verified owner) –
schnellessenken des PH Wertes
Dave London (verified owner) –
Trs bien
David B. (verified owner) –
Die Lieferung war sehr schnell,der Preis gut und das Produkt ist auch super. Guter ph senker
Rosemary Jewell (verified owner) –
What was needed
skip 16 sigs (verified owner) –
wie immer gut , zu empfehlen .