Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
dkef6363 (verified owner) –
Parfait
Alliekiwi (verified owner) –
Trs bon produit
CdC Michael Harloff (verified owner) –
verwende dieses Produkt seit 25 Jahren alles bestens
mch_us_vhww1iaq3f (verified owner) –
Produit efficace.
ad.x (verified owner) –
Must have for hor tubs
Coty (verified owner) –
Verwende das Produkt seit ca 15 Jahren.Bin immer damit zufrieden.
beryl melia (verified owner) –
pleased
Mitchell Wright (verified owner) –
Pratique et efficace.
Ryan Fairbrother (verified owner) –
goodrecommended
Gabriel Dias (verified owner) –
Perfect for the hot tub.