Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Geena Burrett (verified owner) –
Le pH minus est vraiment actif rapidement et sans devoir surdos pour avoir un resultat
gordon abbott (verified owner) –
Macht was es soll, knnte sich jedoch ein bisschen schneller auflsen.
A. Bell (verified owner) –
Easy to use.
Robert A Pesley (verified owner) –
Its very good
Quality (verified owner) –
Deep Blue Super Produkt zum weiterempfehlen
Quality (verified owner) –
Deep Blue Super Produkt zum weiterempfehlen
Fotografo professionista Paolo Cerri (verified owner) –
Its what i wanted
Omidimo (verified owner) –
Ideal for small hot tubs
Eryk Grabkowski (verified owner) –
Bien
lorrpam (verified owner) –
Alles in Ordnung. Es nervt aber wenn ich jede Bestellung kommentieren muss. Mit freundlichem GrussDirk Frowein