Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Mark Taverner (verified owner) –
Super Produkt bin sehr zufrieden
Edouard Et Betty Akoun (verified owner) –
40 stars
Les910 (verified owner) –
Prompte Lieferung alles ok
Les910 (verified owner) –
Prompte Lieferung alles ok
Madgemeister (verified owner) –
20 stars
Jasmine DeGeneste (verified owner) –
bestens ,gut und schnell geliefert
Dafydd Dil (verified owner) –
hab mal dazwischen eine andere marke probiert war aber nicht zufrieden, deshalb wieder Deep Blue
David H (verified owner) –
1000 stars
Dave London (verified owner) –
1000 stars
David Mcilwraith (verified owner) –
10 stars