Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Harangozó à (verified owner) –
Excellent product and service
Mrs S Block (verified owner) –
Would recommend
lennonbo (verified owner) –
Products
lennonbo (verified owner) –
Products
Steve Whitehead (verified owner) –
The best products I have used out so many
David Powell (verified owner) –
Good all round
Martin W (verified owner) –
Work very good
LW50 (verified owner) –
great roots great top
Stefan Shorthouse (verified owner) –
Great product, thanks
Paula (verified owner) –
Product was early this is awesome..