Description
These chlorine granules are one of the most popular products for ensuring pool and spa water is safe and bacteria free.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These granules are rapid dissolving, long lasting and have little effect on the pH of the water. They are suitable for shock dosing small above ground pools. You can find dosing amounts below.
Key Features
Granular chlorine has little effect on the pH level of the water. These stabilised chlorine granules are ideal for regular dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms.
Application Instructions
1. Maintain pH level within the ideal range of 7.2 – 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results.
2. Maintain free chlorine residuals for spas within the range 3 – 5mg/l (ppm). For swimming pools it should be 1 – 3mg/l (ppm). Freshly filled spas require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools or spas where temperatures exceed 20 degrees C. If below this temperature or in doubt it is recommended to pre-dissolve in a clean plastic container at a maximum rate of 10g of product per 0.2 gallons (1ltr) in water. Stir well to ensure product is fully dissolved. Add the resulting solution to the spa or pool whilst the pumps are turned ‘on’.
4. Repeat dose application if necessary to achieve the required levels.
5. It is recommended that you periodically (e.g. weekly or after heavy spa use) shock dose your spa to eliminate any excess contamination.
Dose Rates
Medium hot tub 1,000 litre (220 Gallons) of water requires 2g to increase the chlorine level by 1mg/l (ppm) or 6g to increase chlorine level by 3mg/l(ppm)
Large hot tub 1,500 litre (330 Gallons) of water requires 3g to increase the chlorine level by 1mg/l (ppm) or 9g to increase chlorine level by 3mg/l(ppm)
Small pool 40,000 litres of water requires 80g to increase the chlorine level by 1mg/l (ppm) or 240g to increase chlorine level by 3mg/l(ppm)
Medium pool 60,000 litres of water requires 120g to increase the chlorine level by 1mg/l (ppm) or 360g to increase chlorine level by 3mg/l(ppm)
Large pool 80,000 litres of water requires 160g to increase the chlorine level by 1mg/l (ppm) or 480g to increase chlorine level by 3mg/l(ppm)
Christina Drummond –
Good value for money and does the job
Ana rika –
Regular purchase to shock my hot tub when I refill I change the water or when the chlorine levels are looking really low easy to use just way out what you need and throw it in
Mammut –
The website was easy to use, the price was very competitive and the delivery was super fast. Did not come with a scoop to dispense the chlorine, but we use the old one we had. What was a touch is that the bag inside the container when empied filled the container to the brim, so not like a packet of crips that when you open is half full, here you get a full container. Great value.
Anthony CarterSmith –
Great product and easy to use. It’s expensive as I use lots of it with 32” pool to maintain. Wish they did deals for bulk purchases.
Mindy –
Four Stars
TengNP –
Great buy
Agamemnon –
This product arrived when stated is easy to to use. Will definitely order from these again.
Lisa Viv –
Perfect
Andrew Scott –
Value for Money
Ms. L. Macleod –
Five Stars