Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
silly (verified owner) –
5 stars
Michael Stein (verified owner) –
30 stars
Michael Stein (verified owner) –
30 stars
Chad Johnson (verified owner) –
Habitu ce produit mais en plus petit contenant, ce format me convient parfaitement et vite les achats rapprochs.
mrs m t duff (verified owner) –
40 stars
Jill Graham (verified owner) –
Bin sehr zufrieden Super qualitat
Amysoo (verified owner) –
Kaufe ich immer weil es wirkt
Diane S. (verified owner) –
Conforme au descriptif et rempli bien son rle.Trs efficace par rapport dautres PH
GP (verified owner) –
Bien
mch_us_vhww1iaq3f (verified owner) –
Produit efficace.