Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Wezzo04 (verified owner) –
Schnelle Wirkung, wenn der pH Wert zu hoch ist
Jackie (verified owner) –
Gute Ware,schnelle Lieferung,alles bestens
Bernard (verified owner) –
Fait son travail
Bernard (verified owner) –
Fait son travail
John Fielding (verified owner) –
Super Zufrieden, super Produkt
sharon G. (verified owner) –
Preis, Lieferung, alles passt
Gord (verified owner) –
1000 stars
Miriam (verified owner) –
1000 stars
Kitty (verified owner) –
Supergeil
Denise Temple (verified owner) –
habe ich seit Nutzung meines Pools in Anwendung und bin sehr zufrieden damit