Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Helmut Schuhmandl (verified owner) –
Was soll ich sagen, erfllt seinen Zweck.
Jim (verified owner) –
Top nur zu empfehlen gutes Produkt
Jackie (verified owner) –
Gute Ware,schnelle Lieferung,alles bestens
roogie (verified owner) –
Parfait produit de qualit
JAT (verified owner) –
Gutes Produkt. Wirkt zuverlssig.
PYARDS (verified owner) –
Je suis habitu ce produit qui me convient parfaitement. Se dissout trs facilement dans leau, donc pratique lemploi, rsultat rapide.
Raquel T. (verified owner) –
Good value. Easy to use
Mary Cook (verified owner) –
Perfetto
Antonella M. (verified owner) –
war bis jetzt immer ok mit guter Wirckung
Looper (verified owner) –
Unablssig bei sehr hartem Leitungswasser