Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Belinda (verified owner) –
erfllt seinen Zweck, Gutes Produkt
Vanessa Britton (verified owner) –
thanks
Il Professore (verified owner) –
Utile indispensabile
Hazel M. (verified owner) –
Das pH Pulver muss nicht vorher in einem Wassereimer aufgelst werden. Es lst sich super im PoolWasser. Ein Messbecher ist dabei, damit kann man es direkt ins Poolwasser schtten.
David Mcilwraith (verified owner) –
Good service
Ralu Burnar (verified owner) –
Swimming pool
Juan (verified owner) –
Rien dire pour le prix.
Josephine Pond (verified owner) –
Cumple funcin
jeanne (verified owner) –
does what it says
Pierre-Luc (verified owner) –
Wird seit jahren verwendet und ist in der wirkung gut.Granulat verklumpt leicht bei lngerer Lagerung