Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Ludlow Lady (verified owner) –
HAPPY WITH EVERYTHING
Clive_D (verified owner) –
as needed
Marco inchingolo (verified owner) –
Schnelle Lieferung, TOP Ware.Verpackung mit Styropor gibt Abzug in der BNote
KarenJeffreys (verified owner) –
Wie erwartet sehr gut. Wir haben allerdings auch keine Vergleiche, da wir PoolNeulinge sind.
Mike Bastian (verified owner) –
Super Qualitt
Regan Van Der Hoven (verified owner) –
Deep Blue ist einfach das beste Produkt.
Alice Stock (verified owner) –
Das Produkt tut exakt was es soll, pH Wert senken
Colin Greenwood (verified owner) –
Seit Jahren in Benutzung fr unser Schwimmbad im Freien.
David H (verified owner) –
All good. As expected.m
Krause (verified owner) –
Gute Handhabung durch Prodionierung