Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Katie Lally (verified owner) –
Non un rivenditore serio
lg1726 (verified owner) –
Good value fast delivery
Finlay Campbell (verified owner) –
Alles bestens, bin sehr zufreiden
MaNcu (verified owner) –
Wrde Artikel weiterempfehlen.
Mrs. Pauline Penfold (verified owner) –
Wir benutzen das Produkt seit wir den Pool haben und haben immer nur beste Werte erreicht.
Kartik bhavsar (verified owner) –
Un classique performant qui na plus rien dmontrer
Denisa (verified owner) –
Does the job well.
Naveen Ahmed (verified owner) –
Buen producto
Angelus (verified owner) –
Nehmen Deep Blue schon seit Jahren fr unseren Pool Bestes Produkt
Andrew Turton (verified owner) –
Yay