Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
dianeking06 (verified owner) –
Muy eficaz para bajar el ph
M. Prem (verified owner) –
Fantastic value
WhiskyFishingSleeping (verified owner) –
Exelant
Darcy G. (verified owner) –
Perfect saves the hassle
Edouard Et Betty Akoun (verified owner) –
seems to be doing its job
Gord (verified owner) –
Very good value for money
SephoraAddict (verified owner) –
Esta bien
Daniel Halliday (verified owner) –
normal Produkt ist ja bekannt
Almost French (verified owner) –
Wirkt toll und nachhaltig
Chad Johnson (verified owner) –
Habitu ce produit mais en plus petit contenant, ce format me convient parfaitement et vite les achats rapprochs.