Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Jad Obeid (verified owner) –
Nun mal einen gnstigen Vorrat fr unseren Pool.
Mrs Ann Marie Herd (verified owner) –
Einzelne Tten, kann man deshalb seht gut proportionieren
Petya Asgarova (verified owner) –
Alles gut, hat Gute Wirkung gezeigt
Em Ewing (verified owner) –
Facile utiliser, pas de pbl
Stamping Mad (verified owner) –
Pour une petite piscine
Beckie (verified owner) –
Tre bon produit pour le nettoyage de leau de ma piscine
Mitchell Wright (verified owner) –
Pratique et efficace.
Ryan Fairbrother (verified owner) –
goodrecommended
Dafydd Dil (verified owner) –
hab mal dazwischen eine andere marke probiert war aber nicht zufrieden, deshalb wieder Deep Blue
colleenreinecke (verified owner) –
Es senkt den PH Wert. Was soll man hier sonst schreiben.