Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
praneeth (verified owner) –
passend wie immer, einfache Anwendung
Chad Johnson (verified owner) –
Habitu ce produit mais en plus petit contenant, ce format me convient parfaitement et vite les achats rapprochs.
RaeAlice (verified owner) –
Alles in Ordnung und schnelle Lieferung
Paco Marsh (verified owner) –
100 stars
Emmay (verified owner) –
100 stars
Someone28 (verified owner) –
100 stars
Pierre-Luc (verified owner) –
Wird seit jahren verwendet und ist in der wirkung gut.Granulat verklumpt leicht bei lngerer Lagerung
K.R. (verified owner) –
20 stars
carl webster (verified owner) –
Ist ein gutes Produkt Kann ich nur empfehlen
mrs m marin-blunn (verified owner) –
1000 stars