Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Ralu Burnar (verified owner) –
100 stars
Amysoo (verified owner) –
Kaufe ich immer weil es wirkt
Tracey Bunch (verified owner) –
Sehr schnelle und korekte Abwicklung. 1A Partner
Howard S (verified owner) –
einfach gut wie Deep Blue Produkte sind
Diane S. (verified owner) –
Conforme au descriptif et rempli bien son rle.Trs efficace par rapport dautres PH
Michele W. (verified owner) –
40 stars
A. Bell (verified owner) –
5 stars
Godknowswhat (verified owner) –
Gute Qualitt wie alle Produkte von Deep Blue
Karin Schmitt (verified owner) –
40 stars
Hazel M. (verified owner) –
Das pH Pulver muss nicht vorher in einem Wassereimer aufgelst werden. Es lst sich super im PoolWasser. Ein Messbecher ist dabei, damit kann man es direkt ins Poolwasser schtten.