Description
PH plus granules enables you to increase the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is below 7.2, use pH Plus to raise it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Nicht Danny (verified owner) –
Wirkt sehr schnell und weitestgehend ohne unvorhersehbare Nebenwirkungen.
Joshua Muldoon (verified owner) –
5 stars
Looper (verified owner) –
Unablssig bei sehr hartem Leitungswasser
Nikogam (verified owner) –
Sehr gutes und preiswertes Produkt, funktioniert sehr gut und ist zu dem gnstiger wie manch andere Marken. Einziger Kritikpunkt, ein Dosierbecher wre toll
David G. (verified owner) –
SATISFAIT
Wezzo04 (verified owner) –
Schnelle Wirkung, wenn der pH Wert zu hoch ist
kieshagirl (verified owner) –
Wirkt schnell und effektiv
Katie Lally (verified owner) –
Non un rivenditore serio
Les910 (verified owner) –
Prompte Lieferung alles ok
emzbod (verified owner) –
40 stars