Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Judith Gerrard (verified owner) –
Like them
Jess Matthews –
Does the job
Akka –
Does the job.
Miss T J Barker (verified owner) –
Did job
Marine P. (verified owner) –
Econmico
james m mclean (verified owner) –
Good sized container, value for money
Karen Brayshaw –
Its ok.
inshots (verified owner) –
Does what it’s meant to do.
Brambles (verified owner) –
good
Susan Murray (verified owner) –
Nifty tool