Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
jo chipperfield (verified owner) –
Been using for years. it works you can see the difference.
Cindy R (verified owner) –
Very Good Price on TopoftheLine AN Nutrients. Quick Shipping Too
E. Arnold (verified owner) –
Good nutes
Laura L. George (verified owner) –
Top of the line
ARNAB KUMAR GANGULY (verified owner) –
Works well
Sophie cook (verified owner) –
This came highly recommended and i cant wait to use it
LMendezMx (verified owner) –
Helps roots feed better.
hexenwels (verified owner) –
1000 stars
hexenwels (verified owner) –
1000 stars
Jamar B. (verified owner) –
Used Once, Already Seeing The Results