Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
DWV (verified owner) –
5 stars
Terry D (verified owner) –
Works great
Stewart D (verified owner) –
20 stars
simoevan-47 (verified owner) –
works great ,cleared up root rot I was using hydroguard but it didnt clean up the roots like voodoo do
Lovellmister (verified owner) –
This PH pErfect technology has solved all problems in my grow. Plants are all green and very healthy, growing very well. WIll be using this for a long time….
Lovellmister (verified owner) –
This PH pErfect technology has solved all problems in my grow. Plants are all green and very healthy, growing very well. WIll be using this for a long time….
Ann Kerrigan (verified owner) –
this is my second crop. worked fine.
Trevor (verified owner) –
20 stars
PRP (verified owner) –
knocked out bad case of root rot
Reece Precious (verified owner) –
great product even if they did forget the pipette