Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Adrian – Isle of Man (verified owner) –
Quality granules.
Elliot J. (verified owner) –
This is the best thing you can do for your plants
CHEVALIER Hervé (verified owner) –
I start using Connoisseur grow and bloom and change my plants from being good to greatest thing that ever happen. I havent seen another product out preform Connoisseur.
M. J. Kennedy (verified owner) –
I have had great results with this stuff
Gillian Rose (verified owner) –
I only use the 3 part grow Great stuff.
Jasmine Robinson (verified owner) –
Too early to tell just how good it isAn excellent product if it live up to the hype.
Michaela Hackney (verified owner) –
This stuff is great but extremely expensive.
drm (verified owner) –
Excellent
Terence Mcivor (verified owner) –
great stuff good for any garden thank you very much
Grandma Liz (verified owner) –
Good supplement