Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Mark M. (verified owner) –
Great product and service
stevieboy2071 (verified owner) –
Fiable
jackie underwood (verified owner) –
a little goes along ways
Barry C (verified owner) –
Works well. I use tap water ph7.6. Usually lowers it to about 6.8. After adjusting ph it does keep it in place for at least 5 days. Sometimes needs res adjustments tho.
Zoom 57 (verified owner) –
Correcta
Doug R. (verified owner) –
Been waiting a little time before writing this review. Made 3 orders so far and had damage to one item sunlight ballast they replaced no question. Service from Max in sales and Josef in service were second to none. I would recommend this company. Brent
Albarose Whitaker (verified owner) –
Fa quello che promette.
Mr B. (verified owner) –
Plants are growing real good with the Advanced Nutrients Micro , Bloom , and Grow Fertilizer
dmagnum (verified owner) –
Advanced nutrients says it all Great for the roots
raybet (verified owner) –
Would recommend