Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Alex Sims (verified owner) –
GOOD DOES JOB
LMendezMx (verified owner) –
Helps roots feed better.
t s (verified owner) –
Completely satisfied.
trho5899 (verified owner) –
Constantly out performs all other ab flowering nutrients. Its true you get out what you put in.
Lee F (verified owner) –
Works well. Explosive growth.
Ln2 (verified owner) –
This is some of the best you can buy
Madam MarjA (verified owner) –
Great food just needs dosages for dirt. Same for the app
Devin (verified owner) –
Great
Clare yeomans (verified owner) –
Voodoo
Dolfan in Colorado (verified owner) –
Great thanks