Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Jazmine Cartwright (verified owner) –
best cost
PRP (verified owner) –
knocked out bad case of root rot
Dave O’Brien (verified owner) –
Best nutrients
L mc (verified owner) –
Just what we wanted
alison242923 (verified owner) –
excellent value.
Christopher P. (verified owner) –
A very nice price for ANs top of the line nutrients.
philip son (verified owner) –
I only use the 3 part grow Great stuff.
Alen Kazaryan (verified owner) –
I use only Advance Nutrients and its been turning out great all the time.
chris jennings (verified owner) –
Came well packaged, the seal was not broken
mydart (verified owner) –
it is a great product that works over a broad range of PH due to the chelation of certain elements