Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Nathan B (verified owner) –
Great Fertiliser
Michael Papworth (verified owner) –
Awesome stuff great for beginners
tald5004 (verified owner) –
Very pleased.
picture perfect (verified owner) –
Great does the job
Paul Davis (verified owner) –
Tal y como me imaginaba.
Paul O. (verified owner) –
Used along with micro and grow, this stuff works great This product is not designed to be used alone, only with micro and grow.
Lovellmister (verified owner) –
This PH pErfect technology has solved all problems in my grow. Plants are all green and very healthy, growing very well. WIll be using this for a long time….
dragonbower (verified owner) –
Very good value
LINDA S. (verified owner) –
Works good , no complaints
WendiScotland (verified owner) –
Best bloom formula