Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Peter K. (verified owner) –
Yee
Paul O. (verified owner) –
Used along with micro and grow, this stuff works great This product is not designed to be used alone, only with micro and grow.
Sybil Winifred Reed (verified owner) –
Results, consistancy and cost
Plath27 (verified owner) –
It does what they say it does. the complete line is all I use.
Adil (verified owner) –
Just really help me grew what i was looking for thanks so much outdoor growing
Peggy Hoffmann (verified owner) –
1000 stars
Mr. VG (verified owner) –
Came well packaged, the seal was not broken
dragonbower (verified owner) –
100 stars
Mr C. (verified owner) –
GREAT Prod
Samiah deleon (verified owner) –
40 stars