Description
These chlorine tablets are one of the most popular products for ensuring hot tub and swimming pool water is safe and bacteria free. They are stabilised to minimise chlorine loss to sunlight. They slowly release chlorine over 2–4 days depending on the water flowing over them.
They can be used in floating dispensers, chemical feeds and skimmer baskets.
Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These tablets are slow release and long lasting and have the minimum effect on the pH of the water for a stabilised chlorine tablet.
Key Features
Its best to operate a free Chlorine Range of 3 – 5mg/l for hot tubs and 1-3mg/l for swimming pools. These stabilised chlorine tablets are ideal for regular dosing of your hot tub or swimming pool, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They contain a high level of available chlorine and chlorine stabiliser.
Application Instructions
1. Maintain pH level within the ideal range of 7.2 – 7.6. If outside this range please use our PH plus or PH minus products to adjust for the best results.
2. Maintain free chlorine residuals for hot tubs between 3-5mg/l and for swimming pools between 1 – 3mg/l (ppm). Freshly filled hot tubs require an initial shock or start up dose of chlorine: 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. For floating dispenser: Fill the floating dispenser with tablets and adjust the aperture mechanism at the bottom of the dispenser to obtain the 3-5mg/l (ppm) desired range. Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 3-5mg/l (ppm). The dispenser should be removed from the hot tub whilst bathing.
4. For chlorine feeders: Fill the dispenser and follow feeder instruction manuals on flow regulation to maintain required chlorine levels.
5. For skimmer baskets: Fill the basket with sufficient tablets and monitor levels to maintain required chlorine levels.
6. It is recommended that you periodically (e.g. fortnightly or after heavy use) shock dose your pool to eliminate any excess contamination.
Note: If using in skimmer baskets we would suggest you run the pump often to prevent a build up of chlorine. Please ensure children to not have access to the skimmer as this could be dangerous.
Dose Rates (subject to water flow rate and temperature)
Medium hot tub 1,000 litre (220 Gallons) of water requires approx 1 tablet to increase the chlorine level by 1mg/l (ppm) or 3 tablets to increase chlorine level by 3mg/l(ppm)
Large hot tub 1,500 litre (330 Gallons) of water requires approx 2 tablets to increase the chlorine level by 1mg/l (ppm) or 6 tablets to increase chlorine level by 3mg/l(ppm)
Swimming pools add 1 tablet per 4,500 litres (1000 Gallons) of water and monitor levels.
Raileanu Bogdan –
great value for money
Samarrai –
Very good product
TheGadge –
Useful
Florian Zips –
Good buy
Marilena –
I have read lots of reviews and thought it was a good product. To start with, when it arrived some of the tablets were broken.I put one in the dispenser and put on the pool. After a couple of hours the tablet was almost gone, which surprised me as many people said it lasted over a week.So I was a bit disappointed with the product.
Luis Rey –
Omg I’ve never known anything like it!! I couldn’t get my usual product for my lazy spa st moritz so after reading all the positive reviews i thought I’d try this product. So i popped 2 tablets in my floating mushroom thing the next day me and my 8 year old son went in everything seemed fine. Then we put on the bubbles well…. we both started coughing badly then our eyes began to burn. I will not use this product again its awful its more like industrial for a pond or something its horrible!!
Anl –
Very strong smell
Vent Mauvais –
Good for maintaining chlorine level in our 2,300 (8ft)pool,but took afew days to get the level right (and quite a few tabs)
Petra Lala –
Cleaner water
Chumki M. –
Quality tablets