Description
Chlorine Reducer is used to remove excessive amounts of chlorine or bromine from your pool. When added to pool water the reaction time can be as long as 24 hours.
DIRECTIONS FOR USE
- Remove swimming pool cover until chlorine level has dropped below 5ppm (parts per million)
- Ensure pool circulation pump is running when applying this product.
- Pre-dissolve product into a clean plastic bucket of warm water. Stir until product is fully dissolved.
- Slowly pour solution into pool directly above the pool return. (Do not pour solution into skimmer)
- Chlorine Reducer when applied to pool water at a rate of 800gm per 50 cubic metres (11,000 gallons) of pool water will reduce the chlorine content by approximately 10ppm (parts per million).
- After applying Chlorine Reducer, run pool circulation pump continuously and wait at least 24hours before re-testing chlorine or bromine level. Add more product if required.
- If your pool is sanitised with bromine rather than chlorine, use half the quantity of product prescribed above.
- Ensure that chlorine or bromine level has been reduced to below 5ppm before using pool.
Evagoras (verified owner) –
Happy
Ebzy (verified owner) –
little goes a long way
Elijah Cho (verified owner) –
Does what it says on tin
NathanX (verified owner) –
the miracle cure !
Lucy w –
Does the job
Bryan C –
Does exactly what it says on the tin
Tinschen (verified owner) –
Brilliant Chlorine reducer for a Hot tub!
Vinyl Note (verified owner) –
Good sized container, value for money
K. A. Cattell (verified owner) –
Just follow the instructions on the label
susiet27 –
Worked a little too wellŠ²ŠĀ¦