Description
PH minus granules enables you to decrease the pH of your pool or hot tub to the ideal level, which is between 7.2 – 7.6, promoting bather comfort, optimum chemical efficiency and protection of pool plant equipment.
Subject to available stock, heavy orders may be sent as multiples of smaller tubs.
Test the pH of your pool water if it is above 7.6, use pH minus to lower it.
Application Instructions:
1. Pre-dissolve the product in a clean plastic container at a maximum rate of 100g of product per 10 Litres of clean warm water. Stir well to ensure product is fully dissolved. Carefully add the resulting solution to the water whilst the pump(s) are turned ‘on’, preferably near to the water inlets to aid distribution.
2. After a minimum of 8 hours, recheck the pH level and if necessary repeat the treatment until the ideal pH is established. Please note a number of treatments may be required.
Dosing rates:
Hot tub: 1,000 litres (220 Gallons) of water – add 10g
Small pool 40,000 litres (8800 Gallons) of water – add 450g
Medium pool 60,000 litres (13200 Gallons) of water – add 650g
Luke Thomeret –
Works great for a hot tub
Rytis Vaiginas (verified owner) –
Good stuff
Paolo Pezzera –
Good product
Ludwig Schiller –
Treatment for hot tub
Anonymous4 (verified owner) –
It works
Bjorn Dnyel (verified owner) –
Good brand
Jay Hay –
0
Lorna Lea –
Funziona !
Sherraine (verified owner) –
Did the trick – reduced pH and TA
Paupar –
Na